SPLITMix4

Four Channel Passive Splitter/Mixer
The SPLITMix4 is a fully passive hybrid mixer that
offers a wide variety of configurations. Mix 4 stereo
input channels down to 1 stereo output, split a stereo
input signal to distribute 4 stereo output channels,
or combine the configurations for a wide range of
applications. You can even configure the SPLITMix4
as 4 stereo input channels thru 4 independent level
attenuators to 4 stereo output channels.

Independent stereo level controls are provided on each
channel. All 1/4-inch connections are stereo TRS
(Tip, Ring, Sleeve) and all channel connections have
intelligent switching to allow for a wide variety of configurations.
Plugging into a mix input channel removes it from the
splitter bus, and plugging into a splitter output channel
removes it from the mix bus. Stereo or mono operation
is determined by the type of 1/4-inch plug and cabling
that you use.

The fully passive design of the SPLITMix4 has no active
circuitry to add noise or distortion, and virtually any signal
level can be handled. The Level attenuators cover a wide
range and offer over 90dB of attenuation and channel isolation.
The SPLITMix4 is designed primarily as a line level device
with medium input and output impedances.